We offer Local Body Shop & Auto Repair
 Onsite Programming and Diagnostics

BOB'S AUTO SERVICE CENTER offers mobile programming and diagnosing to independent automotive repair businesses and body shops. We understand there are times a vehicle is brought to your business, and you have diagnosed a faulty module. At this time, it needs to be programmed or maybe even a reprogramming needs to be performed.

 

Not all automotive businesses have all the OE tooling to perform programming. The following is a list of OE tooling we do have and offer reprogramming services for:

 

  • GM
  • Ford
  • Chrysler (FCA)
  • Toyota
  • Nissan
  • Hyundai
  • Kia
  • Honda
  • Mazda

 

Vehicles that are drivable, may be brought to our facility, or we can go to your business. If the vehicle is not drivable, it is more feasible for us to come to you. At this point, you would need to contact our business to make arrangements so we may service your needs. There will be specific questions the service advisor will ask you. These questions are important to ask in order for us to better service you and to eliminate any misunderstanding or unforeseen problems. Each manufacture plays by a different set of rules when it comes to programming their vehicles. Sometimes, there are unforeseen issues, but not often but do happen from time to time.

 

Why use our business? Easiest way to sum it up is the cold hard facts. You now have a vehicle in your shop (example) with a new PCM installed. It now does not crank or run. You now need to have the PCM programmed and immobilizer performed on most models.

 

If you have to tow it to the dealer, there is a cost associated with towing. You will then, have to pay the dealer to perform the task. You may also be at the mercy of the dealer with no control and a customer who is not understanding of the extra costs associated with the repair.  Furthermore, it will take two people out of your business to retrieve the customer’s vehicle.

 

Lastly, the customer might say they should have taken it to the dealer to begin with because they would not have occurred all the extra costs. This can be an unpopular subject for all parties involved and can result in lost customer’s confidence and retention.

 

We can help with the issues listed above. If you know the module needs to be programmed prior to install, call our service advisor and provide the details. We will quote a price to come out to your facility and program the module.

 

Why contact us to program the module and not the dealer? Most of these reasons are listed above. The number one discerning factor is if we come to you and do the work for a modest fee. The customer will think you did all the work and can service all their needs. The first time you tell them, their car has to be towed to the dealer, they start to lose confidence in your business and feel that they should have taken it there in the beginning.

 

By contracting our business, we will do the work in-house for you. As far as the customer is concerned, all work was completed on-site by your business. As a result, more customer retention without all the hassle and everyone is happy.

 

We offer our diagnostic capabilities mobile. This is done on a case by case basis depending on the mitigating issue(s). Most businesses opt to have the vehicle towed, or driven to our shop as it allows for their service bay to be cleared. This allows the business to work on other customer vehicles which need to be repaired and returned to the owners.

 

By having the vehicle brought to our facility, we will diagnose the vehicle in a controlled environment and provide an estimate. You may also repair the vehicle yourself after our diagnostics. The choice is yours.

 

Just remember, we may be busy servicing on other vehicles and may not start on your customer’s vehicle right away. Most often we have businesses call us to diagnose the vehicle. They drop it off, and then call us every couple hours to see if we have diagnosed it yet. This situation arises because the repair facility has had it for several days already and the customer is anxious to find out a status on their vehicle. Please, do not pass the stress onto us. We are here to serve you as you are in business to service your customers. Let’s keep the lines of communication open by sharing information as we progress through the flow of diagnostics.

V I S I T S
V I S I T S
We offer Local Body Shop & Auto Repair
 Onsite Programming and Diagnostics
V I S I T S
V I S I T S
 
We offer Local Body Shop & Auto Repair 

Onsite Programming and Diagnostics

BOB'S AUTO SERVICE CENTER offers mobile programming and diagnosing to independent automotive repair businesses and body shops. We understand there are times a vehicle is brought to your business, and you have diagnosed a faulty module. At this time, it needs to be programmed or maybe even a reprogramming needs to be performed.

 

Not all automotive businesses have all the OE tooling to perform programming. The following is a list of OE tooling we do have and offer reprogramming services for:

 

  • GM
  • Ford
  • Chrysler (FCA)
  • Toyota
  • Nissan
  • Hyundai
  • Kia
  • Honda
  • Mazda

 

Vehicles that are drivable, may be brought to our facility, or we can go to your business. If the vehicle is not drivable, it is more feasible for us to come to you. At this point, you would need to contact our business to make arrangements so we may service your needs. There will be specific questions the service advisor will ask you. These questions are important to ask in order for us to better service you and to eliminate any misunderstanding or unforeseen problems. Each manufacture plays by a different set of rules when it comes to programming their vehicles. Sometimes, there are unforeseen issues, but not often but do happen from time to time.

 

Why use our business? Easiest way to sum it up is the cold hard facts. You now have a vehicle in your shop (example) with a new PCM installed. It now does not crank or run. You now need to have the PCM programmed and immobilizer performed on most models.

 

If you have to tow it to the dealer, there is a cost associated with towing. You will then, have to pay the dealer to perform the task. You may also be at the mercy of the dealer with no control and a customer who is not understanding of the extra costs associated with the repair.  Furthermore, it will take two people out of your business to retrieve the customer’s vehicle.

 

Lastly, the customer might say they should have taken it to the dealer to begin with because they would not have occurred all the extra costs. This can be an unpopular subject for all parties involved and can result in lost customer’s confidence and retention.

 

 

We can help with the issues listed above. If you know the module needs to be programmed prior to install, call our service advisor and provide the details. We will quote a price to come out to your facility and program the module.

 

Why contact us to program the module and not the dealer? Most of these reasons are listed above. The number one discerning factor is if we come to you and do the work for a modest fee. The customer will think you did all the work and can service all their needs. The first time you tell them, their car has to be towed to the dealer, they start to lose confidence in your business and feel that they should have taken it there in the beginning.

 

By contracting our business, we will do the work in-house for you. As far as the customer is concerned, all work was completed on-site by your business. As a result, more customer retention without all the hassle and everyone is happy.

 

We offer our diagnostic capabilities mobile. This is done on a case by case basis depending on the mitigating issue(s). Most businesses opt to have the vehicle towed, or driven to our shop as it allows for their service bay to be cleared. This allows the business to work on other customer vehicles which need to be repaired and returned to the owners.

 

By having the vehicle brought to our facility, we will diagnose the vehicle in a controlled environment and provide an estimate. You may also repair the vehicle yourself after our diagnostics. The choice is yours.

 

Just remember, we may be busy servicing on other vehicles and may not start on your customer’s vehicle right away. Most often we have businesses call us to diagnose the vehicle. They drop it off, and then call us every couple hours to see if we have diagnosed it yet. This situation arises because the repair facility has had it for several days already and the customer is anxious to find out a status on their vehicle. Please, do not pass the stress onto us. We are here to serve you as you are in business to service your customers. Let’s keep the lines of communication open by sharing information as we progress through the flow of diagnostics.

 

V I S I T S
We offer Local Body Shop & Auto Repair 
 Onsite Programming and Diagnostics
V I S I T S
We offer Local Body Shop & Auto Repair 
 Onsite Programming and Diagnostics
V I S I T S
We offer Local Body Shop & Auto Repair 
 Onsite Programming and Diagnostics
V I S I T S
 
We offer Local Body Shop & Auto Repair
 Onsite Programming and Diagnostics

BOB'S AUTO SERVICE CENTER offers mobile programming and diagnosing to independent automotive repair businesses and body shops. We understand there are times a vehicle is brought to your business, and you have diagnosed a faulty module. At this time, it needs to be programmed or maybe even a reprogramming needs to be performed.

 

Not all automotive businesses have all the OE tooling to perform programming. The following is a list of OE tooling we do have and offer reprogramming services for:

 

  • GM
  • Ford
  • Chrysler (FCA)
  • Toyota
  • Nissan
  • Hyundai
  • Kia
  • Honda
  • Mazda

 

Vehicles that are drivable, may be brought to our facility, or we can go to your business. If the vehicle is not drivable, it is more feasible for us to come to you. At this point, you would need to contact our business to make arrangements so we may service your needs. There will be specific questions the service advisor will ask you. These questions are important to ask in order for us to better service you and to eliminate any misunderstanding or unforeseen problems. Each manufacture plays by a different set of rules when it comes to programming their vehicles. Sometimes, there are unforeseen issues, but not often but do happen from time to time.

 

Why use our business? Easiest way to sum it up is the cold hard facts. You now have a vehicle in your shop (example) with a new PCM installed. It now does not crank or run. You now need to have the PCM programmed and immobilizer performed on most models.

 

If you have to tow it to the dealer, there is a cost associated with towing. You will then, have to pay the dealer to perform the task. You may also be at the mercy of the dealer with no control and a customer who is not understanding of the extra costs associated with the repair.  Furthermore, it will take two people out of your business to retrieve the customer’s vehicle.

 

Lastly, the customer might say they should have taken it to the dealer to begin with because they would not have occurred all the extra costs. This can be an unpopular subject for all parties involved and can result in lost customer’s confidence and retention.

 

We can help with the issues listed above. If you know the module needs to be programmed prior to install, call our service advisor and provide the details. We will quote a price to come out to your facility and program the module.

 

Why contact us to program the module and not the dealer? Most of these reasons are listed above. The number one discerning factor is if we come to you and do the work for a modest fee. The customer will think you did all the work and can service all their needs. The first time you tell them, their car has to be towed to the dealer, they start to lose confidence in your business and feel that they should have taken it there in the beginning.

 

By contracting our business, we will do the work in-house for you. As far as the customer is concerned, all work was completed on-site by your business. As a result, more customer retention without all the hassle and everyone is happy.

 

We offer our diagnostic capabilities mobile. This is done on a case by case basis depending on the mitigating issue(s). Most businesses opt to have the vehicle towed, or driven to our shop as it allows for their service bay to be cleared. This allows the business to work on other customer vehicles which need to be repaired and returned to the owners.

 

By having the vehicle brought to our facility, we will diagnose the vehicle in a controlled environment and provide an estimate. You may also repair the vehicle yourself after our diagnostics. The choice is yours.

 

Just remember, we may be busy servicing on other vehicles and may not start on your customer’s vehicle right away. Most often we have businesses call us to diagnose the vehicle. They drop it off, and then call us every couple hours to see if we have diagnosed it yet. This situation arises because the repair facility has had it for several days already and the customer is anxious to find out a status on their vehicle. Please, do not pass the stress onto us. We are here to serve you as you are in business to service your customers. Let’s keep the lines of communication open by sharing information as we progress through the flow of diagnostics.

 

V I S I T S
We offer Local Body Shop & Auto Repair
 Onsite Programming and Diagnostics

BOB'S AUTO SERVICE CENTER offers mobile programming and diagnosing to independent automotive repair businesses and body shops. We understand there are times a vehicle is brought to your business, and you have diagnosed a faulty module. At this time, it needs to be programmed or maybe even a reprogramming needs to be performed.

 

Not all automotive businesses have all the OE tooling to perform programming. The following is a list of OE tooling we do have and offer reprogramming services for:

 

  • GM
  • Ford
  • Chrysler (FCA)
  • Toyota
  • Nissan
  • Hyundai
  • Kia
  • Honda
  • Mazda

 

Vehicles that are drivable, may be brought to our facility, or we can go to your business. If the vehicle is not drivable, it is more feasible for us to come to you. At this point, you would need to contact our business to make arrangements so we may service your needs. There will be specific questions the service advisor will ask you. These questions are important to ask in order for us to better service you and to eliminate any misunderstanding or unforeseen problems. Each manufacture plays by a different set of rules when it comes to programming their vehicles. Sometimes, there are unforeseen issues, but not often but do happen from time to time.

 

Why use our business? Easiest way to sum it up is the cold hard facts. You now have a vehicle in your shop (example) with a new PCM installed. It now does not crank or run. You now need to have the PCM programmed and immobilizer performed on most models.

 

If you have to tow it to the dealer, there is a cost associated with towing. You will then, have to pay the dealer to perform the task. You may also be at the mercy of the dealer with no control and a customer who is not understanding of the extra costs associated with the repair.  Furthermore, it will take two people out of your business to retrieve the customer’s vehicle.

 

Lastly, the customer might say they should have taken it to the dealer to begin with because they would not have occurred all the extra costs. This can be an unpopular subject for all parties involved and can result in lost customer’s confidence and retention.

 

We can help with the issues listed above. If you know the module needs to be programmed prior to install, call our service advisor and provide the details. We will quote a price to come out to your facility and program the module.

 

Why contact us to program the module and not the dealer? Most of these reasons are listed above. The number one discerning factor is if we come to you and do the work for a modest fee. The customer will think you did all the work and can service all their needs. The first time you tell them, their car has to be towed to the dealer, they start to lose confidence in your business and feel that they should have taken it there in the beginning.

 

By contracting our business, we will do the work in-house for you. As far as the customer is concerned, all work was completed on-site by your business. As a result, more customer retention without all the hassle and everyone is happy.

 

We offer our diagnostic capabilities mobile. This is done on a case by case basis depending on the mitigating issue(s). Most businesses opt to have the vehicle towed, or driven to our shop as it allows for their service bay to be cleared. This allows the business to work on other customer vehicles which need to be repaired and returned to the owners.

 

By having the vehicle brought to our facility, we will diagnose the vehicle in a controlled environment and provide an estimate. You may also repair the vehicle yourself after our diagnostics. The choice is yours.

 

Just remember, we may be busy servicing on other vehicles and may not start on your customer’s vehicle right away. Most often we have businesses call us to diagnose the vehicle. They drop it off, and then call us every couple hours to see if we have diagnosed it yet. This situation arises because the repair facility has had it for several days already and the customer is anxious to find out a status on their vehicle. Please, do not pass the stress onto us. We are here to serve you as you are in business to service your customers. Let’s keep the lines of communication open by sharing information as we progress through the flow of diagnostics.

 

 

V I S I T S
We offer Local Body Shop & Auto Repair
 Onsite Programming and Diagnostics
V I S I T S
We offer Local Body Shop & Auto Repair
 Onsite Programming and Diagnostics
V I S I T S
We offer Local Body Shop & Auto Repair
 Onsite Programming and Diagnostics

BOB'S AUTO SERVICE CENTER offers mobile programming and diagnosing to independent automotive repair businesses and body shops. We understand there are times a vehicle is brought to your business, and you have diagnosed a faulty module. At this time, it needs to be programmed or maybe even a reprogramming needs to be performed.

 

Not all automotive businesses have all the OE tooling to perform programming. The following is a list of OE tooling we do have and offer reprogramming services for:

 

  • GM
  • Ford
  • Chrysler (FCA)
  • Toyota
  • Nissan
  • Hyundai
  • Kia
  • Honda
  • Mazda

 

Vehicles that are drivable, may be brought to our facility, or we can go to your business. If the vehicle is not drivable, it is more feasible for us to come to you. At this point, you would need to contact our business to make arrangements so we may service your needs. There will be specific questions the service advisor will ask you. These questions are important to ask in order for us to better service you and to eliminate any misunderstanding or unforeseen problems. Each manufacture plays by a different set of rules when it comes to programming their vehicles. Sometimes, there are unforeseen issues, but not often but do happen from time to time.

 

Why use our business? Easiest way to sum it up is the cold hard facts. You now have a vehicle in your shop (example) with a new PCM installed. It now does not crank or run. You now need to have the PCM programmed and immobilizer performed on most models.

 

If you have to tow it to the dealer, there is a cost associated with towing. You will then, have to pay the dealer to perform the task. You may also be at the mercy of the dealer with no control and a customer who is not understanding of the extra costs associated with the repair.  Furthermore, it will take two people out of your business to retrieve the customer’s vehicle.

 

Lastly, the customer might say they should have taken it to the dealer to begin with because they would not have occurred all the extra costs. This can be an unpopular subject for all parties involved and can result in lost customer’s confidence and retention.

 

We can help with the issues listed above. If you know the module needs to be programmed prior to install, call our service advisor and provide the details. We will quote a price to come out to your facility and program the module.

 

Why contact us to program the module and not the dealer? Most of these reasons are listed above. The number one discerning factor is if we come to you and do the work for a modest fee. The customer will think you did all the work and can service all their needs. The first time you tell them, their car has to be towed to the dealer, they start to lose confidence in your business and feel that they should have taken it there in the beginning.

 

By contracting our business, we will do the work in-house for you. As far as the customer is concerned, all work was completed on-site by your business. As a result, more customer retention without all the hassle and everyone is happy.

 

We offer our diagnostic capabilities mobile. This is done on a case by case basis depending on the mitigating issue(s). Most businesses opt to have the vehicle towed, or driven to our shop as it allows for their service bay to be cleared. This allows the business to work on other customer vehicles which need to be repaired and returned to the owners.

 

By having the vehicle brought to our facility, we will diagnose the vehicle in a controlled environment and provide an estimate. You may also repair the vehicle yourself after our diagnostics. The choice is yours.

 

Just remember, we may be busy servicing on other vehicles and may not start on your customer’s vehicle right away. Most often we have businesses call us to diagnose the vehicle. They drop it off, and then call us every couple hours to see if we have diagnosed it yet. This situation arises because the repair facility has had it for several days already and the customer is anxious to find out a status on their vehicle. Please, do not pass the stress onto us. We are here to serve you as you are in business to service your customers. Let’s keep the lines of communication open by sharing information as we progress through the flow of diagnostics.

 

V I S I T S
We offer Local Body Shop & Auto Repair
 Onsite Programming and Diagnostics
V I S I T S